Greentech (Tianjin) Anti-corrosion Engineering Tech Co.,Ltd
New start, Leap forward, Hand in hand, Build our dreams
Add to Cart
Introduction: a thermosetting epoxy modified heavy-duty powder coatings specially designed for epoxy anti-corrosion coating steel, this product adopts imported two step method special epoxy, part functional epoxy, match up dedicated anticorrosive epoxy firming agent, unique compound design and practical by the authoritative department detection, has good reactivity, strong adhesion strength, good toughness and bending resistance, excellent chemical resistance, solvent resistance, cathodic disbonding resistance, impact resistance and other properties.
Feature:
| PRODUCT DESCRIPTION | A single component, borate and chlorine free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire. NH 1120 is a low VOC acrylic intumescent material independently fire tested for up to 3 hour fire ratings in accordance with ASTM E119/UL263, BS 476 20-22, EN 13381-8 and GB 14907. NH 1120 is a CE marked product with European Technical Approval ETA-11/0045. | |
| INTENDED USES | Pipeline Rebar Steel | |
| PRACTICAL INFORMATION FOR NH 1120
| Colour | as customer required |
| Gloss Level | Matt | |
| Volume Solids
| 68% ± 3% (measured according to ISO 3233 and BCF Guidance Method) | |
| Typical Thickness
| 300-700 microns (12-28 mils) dry equivalent to 441-1029 microns (17.6-41.2 mils) wet Required film thickness is dependent upon fire rating | |
| Theoretical Coverage | 1 m²/litre at 700 microns d.f.t and stated volume solids 39 sq.ft/US gallon at 28 mils d.f.t and stated volume solids | |
| Practical Coverage | Allow appropriate loss factors Airless Spray, Brush, Roller | |
| Method of pplication | Overcoating interval with self | |
